Polyurethane rubbers | PU Rubber Products | PU Roller | PU Sheet | PU Bush

Polyurethane rubbers are two-component systems (base plus curative; A+B) that cover a wide variety of applications at a relatively low cost. They are available for making molds that are poured, brushed or sprayed onto a model.

Advantages

• Polyurethanes are easy to use, with many having a simple mix ratio by volume (i.e. 1A: 1B) – no scale required.
• Flexible urethanes are available in a wide hardness range from gel-like to harder than a car tire and everything in between.
• Urethane rubbers have relatively low viscosity and "de-air" themselves – no vacuum degassing required.
• Urethanes have good abrasion resistance and are used to cast abrasive materials like concrete.
• Polyurethane rubbers are less expensive than silicones and polysulfides.

Disadvantages

• As silicone rubber has the best release properties, urethane rubber has the worst release properties and will adhere to just about anything. Thorough model preparation is essential to successful mold making with urethane rubber.
• Urethanes are moisture sensitive and may bubble if exposed to too much moisture (making molds outside on a very humid day, for example).
• Polyurethanes have a limited shelf life after opening – remaining product may be affected by ambient moisture in the air. (Smooth-On makes a product called that greatly extends the shelf life of unused urethanes).

Polyurethane rubbers | PU Rubber Products | PU Roller | PU Sheet | PU Bush

Send us your enquiry if you have questions or comments about our products and services.