Fluoroelastomer (Viton) Gaskets & Seals | Viton Seal | Viton Gasket | Viton oil seal

Fluoroelastomer seals are manufactured by RUGAVAL Seals for a wide range of industries and applications.  We fabricate tens of thousands of seals every year and stand by our promise to deliver on-time, on-budget Fluoroelastomer gaskets that meet the performance demands of your application.  Our engineering department will work with your supplied drawing or will reverse engineer your sample part to ensure your specifications and tolerance requirements are met.

Fluoroelastomer Gasket & Seal Material

The high cost of Fluoroelastomer material may limit usage to extreme applications.  Resilience is low and tear strength is limited unless certain compounding steps are taken to improve it.  Impact resistance is fair.  However, Fluoroelastomer has an excellent resistance to heat and oil combination; hot greases found in engines and compressors as well as excellent resistance to a wide range of concentrated acids. 

Fluoroelastomer Gasket Material Grades

Fluoroelastomer Grade differential is seen mostly in the end-use performance of the viton gasket material.  Each type will differ in its resistance to permeation and property degradation caused by the chemicals and fluids making contact with the material.

Fluoroelastomer A:  (also referenced as commercial grade) the most widely used of the Fluoroelastomer grades as a general purpose seal for automotive, aerospace, lubricants and fuels.

Fluoroelastomer B: used in chemical processing, utilities and power industries.

Fluoroelastomer F: best suited for applications making contact with automotive fuels, aqueous inorganic acids, water and steam.

Fluoroelastomer Extreme: excceptional for extremely harsh chemical environments involved in automotive oil seals, aerospace fuels, oil field applications.

Fluoroelastomer Gasket & Seal Manufacturing Process

All Fluoroelastomer Gaskets & Seals are manufactured in our modern facility that is continuously updated with the latest technology and equipment.  Our capabilities include water jet cutting (which gives us tight tolerances within +/-.007”), flash cutting, die cutting or hand cutting.  Our veteran technicians will evaluate your application and specific material to determine the most appropriate manufacturing process that will deliver a Fluoroelastomer part that exceeds your expectation.

We Welcome Custom Made.

Fluoroelastomer (Viton) Gaskets & Seals | Viton Seal | Viton Gasket | Viton oil seal

Send us your enquiry if you have questions or comments about our products and services.